Tube Heater | 1ft - 6ft | 45 Watt - 360 Watt
Our tube heaters offer the ideal heating solution for applications that require low cost, steady background heat.
Designed with safety in mind, tubular heaters are a versatile heating product that are used as a heat source or frost protection and to prevent condensation. They can be used in a variety of environments: to provide greenhouse heating, to heat an airing cupboard where there is no longer a hot water cylinder, to stop condensation building on windows and walls, in caravans, boats, kennels, out buildings, toilets, etc. They can also be used to supplement existing domestic or commercial heating systems, offering an economical source of additional heat.
Our Tubes are not only designed to be a versatile unit but a powerful one. The average surface temperature of our heaters is approximately 95°c at peak operation.
All our tube heaters are IP55 rated and are available in sizes of 1 - 6ft.
Our tube heaters are made from steel, powder coated in white.
Our tube heaters are designed to provide steady background heat as economically as possible. Tube heaters are perfect for frost protection and preventing condensation.
Running costs can be improved with the use of our thermostat. Our tube heaters are designed to be run at all times - however, due to their years of development, you can switch the Tube Heater on and off throughout the day without risk of damaging the element.
To ensure our tube heaters will always be ideal we have worked hard to achieve an IP55 rating. Our Tubes are protected against dust as well as being protected against water sprays from all directions.
Just plug into your socket, plug your appliance into the thermostat, set the required temperature and that's it! The thermostat will stop and start your heater as the temperature rises and falls. Ideal for tube heaters, fan heaters, oil filled heaters, convection heaters and electric radiators.
- Approx size: 12cm long, 6cm wide, 4.5cm deep (not inc plug in prongs)
- Indicator light to show when the appliance is on/off
- Maximum resistive load: 13A 3120W
- Maximum inductive load: 2A 460W
- Operating temperature: -10c (14f) ~ 70c (158f)
- Temperature Control Range: 5c (40f) ~ 30c (85f)
- Precision: +/-1c
- Measuring period: 10s
All our tubular heater guards are made from powder coated steel and are designed with safety in mind. Offering protection against the tubular heaters hot surface, they are ideal for use in environments in where the very young or elderly are likely to be left unsupervised or where pets have access.
WARNING: Elixir Tube Heaters (when powered on) can get hot to the touch, do not try to move the heater during use or shortly thereafter. Heater must be installed horizontally, any damaged units incurred from incorrect fitting cannot be refunded or replaced.
|Description||Rating Watts||Length mm||Mounted Height mm||Diameter mm||Weight kg|
|1ft Tubular Heater||45||400||80||55||0.8|
|2ft Tubular Heater||80||700||80||55||1.2|
|3ft Tubular Heater||135||1000||80||55||1.7|
|4ft Tubular Heater||240||1300||80||55||2.3|